Average Reviews:
(More customer reviews)This holder is made completely from plastic. Except for the screw, a metal holding plate beneath the rod, and the rubber boot. For the cheaper cost, I find it more attractive than the standard clamp.
Fully unscrewed the mouth is 1-1/4" wide. The C-clamp is bent slightly inward, so the screw plate is not flat with the surface. As you tighten the C-clamp it expands a little and the screw plate will sit flat to the surface. At that point stop tightning as you will further distend the C-clamp and possibly damage the plastic threads. Repeated over distending could damage the C-clamp over time. About three or four turns after surface contact is all you need. This makes wig styling on your mannequin head much easier.
The locking ring for the rod resembles a ship's Tiller wheel. It appears to give a 40 degree slant in any direction. Rotate the wheel counter-clockwise to loosen and clockwise to tighten. Again, no need to over tighten as the rod has a ball with little dimples for gripping. Over tightning can wear them off. Mannequinn heads simply aren't that heavy - even with large wigs.
It should hold any mannequin head nicely and firmly. It will last a long time providing you don't over tighten anything.
Click Here to see more reviews about: Celebrity Budget Manikin Holder
Click here for more information about Celebrity Budget Manikin Holder
0 comments:
Post a Comment